Quantcast
Channel: Oldenhammer in Toronto
Viewing all articles
Browse latest Browse all 190

Making a Desert Skiff for Imperial Assault

$
0
0



I've gotten some questions about the desert skiff that I used in pictures from my last post on Jabba's Realm, the new expansion for Star Wars Imperial Assault. So I thought I'd quickly post to explain how I kit-bashed this skimmer (also known as the Bantha-II Cargo Skiff) for use in 28mm or 30mm games like Imperial Assault

But first, some grousing... Fantasy Flight Games failed fans with their slapdash approach to scenery (like desert skiffs) in Jabba's Realm. The sequence above the Sarlacc Pit in Return of the Jedi is one of the most exciting action scenes in the Star Wars films. Appropriately, FFG attempted to create game scenarios that involved both the Pit, Jabba's barge and the smaller desert skiffs. But the map tiles meant to represent these locations are miserable. The barge is a bland, generic interior; the Sarlacc Pit is inexplicably cut in half; and there are no skiffs at all (instead, players use featureless interior hallway tiles to mimic the skiffs). None of this makes any sense to me. The joy of Imperial Assault is that you replicate almost anything you want on the tiles... it just takes a bit of cardboard.

Well, in any case, since FFG cheaped out on giving us desert skiffs, I decided to create my own. I started by finding a couple old Micro Machine Dune Sea Desert Skiffs on eBay. These are nicely detailed models, but much too small to be used as a skiff in Imperial Assault, since the skiffs must have a flat playing space of 5" by 2" (or 5x2 maps squares). My simple plan was to extend the deck on the Micro Machine while keeping the distinctive features of the skiff itself.





Above we see the original skiff.





Step 1: Disassemble the skiff by removing the screws.





Step 2: Chop up the bow and stern of the top part of the model. Leave the bottom part intact.





Step 3: Reassemble the bottom part of the vessel with the stern.





Step 4: Cut a piece of balsa wood with a 4" by 2" area, plus a projecting beak for the bow. (Not shown: I also cut out a 1" by 2" piece for use as a 'rear deck" to mount on top of the stern. Together, the main deck and the rear deck give the skiff the required 5" by 2" playing space.)





Step 5: Cut out 2 pieces of magnetic tape for the deck (Since I mount all my IA figures on metal washers, the magnetic tape gives them extra stability when the stand on the skimmer).





Step 6: Glue the bow to the balsa wood. Cover the magnetic tape with model train fence mesh. Glue a stiff length of wood in the middle of the deck (between the two pieces of magnetic tape) in order to give strength to the construction. I also glued a support strut to the bottom of the deck.





Step 7: Glue the deck to the bottom/stern of the model. Glue the small rear deck to the top of the stern. Fill in gaps with putty. Sand rough edges. (Not shown: I also glued some metal ball-bearings to the inside of the base to give the whole model more stability).





Painting was fast and dirty. The main body of the skiff was painted khaki and roughly dry-brushed. The mesh was painted black and dry-brushed with gunmetal. Then I applied a coat of Army Painter Quickshade Strong Tone. Rust and oil effects were then added with oil paint and white spirit. And then, of course, a varnish with Dullcote. Now we're ready for the Pit of Carkoon!






Thanks for stopping by and please let me know in the comments if you've made your own desert skiff...



Viewing all articles
Browse latest Browse all 190

Trending Articles