This photo of two Oldhammer Dwarfs comes courtesy of my new Foldio Light Box from Orange Monkie.
![]( "Norse Dwarf Berserker (Perry Twins, 1985) and Stealthy Dwarf Thief (Perry Twins, 1985)")
When you photograph 28mm miniatures, everything depends on lighting. If you wish to expose the miniature's undercarriage, bring out the colours and capture detail, you will need theological quantities of light. With enough illumination, even the camera in a smartphone can take satisfying pictures (I use a Samsung Galaxy s4 and have always been pleased with its performance). But without light, even the best mini becomes a dingy turd.
![]( "DM24 Meazels from Otherworld Miniatures (sculpted by Kev Adams, 2011)")
When I first started this blog, I took my photos outdoors, in the shade of a sunny day (see the above Meazels from Otherworld Miniatures for an example). The results were tolerable, but there was a lot of inconvenience: the wind kept knocking over my backdrop, the lighting changed with the cloud cover, and there was an ever present danger of fresh air getting into my lungs. The obvious solution was a light box, either bought from eBay or made at home. Light boxes provide the dual benefit of concentrating light indoors while creating a smooth background for the mini. After reading some helpful advice, I decided to purchase the Foldio portable light box.
![]( "My Foldio set-up, complete with extra lighting")
I was attracted to the Foldio because it came with its own backdrops and a compact system of lighting, using lightweight LCD strips shining at the frequency of daylight. I also liked the fact that it packs up into a small, flat packet for easy storage.
![]( "Home-brew stands with LCD light strips from Orange Monkie")
When you add these extra light strips, plus a substantial amount of duties and shipping (not to mention batteries), my Foldio system has ballooned to almost $200. A do-it-yourself light box would have been vastly cheaper. On the other hand, the Foldio is convenient and elegant. Oh well. Light, like other precious commodities, can be surprisingly expensive.
![Now That's an Orc!]( "Orc from Citadel's Talisman Range (Aly Morrison?)")
When you photograph 28mm miniatures, everything depends on lighting. If you wish to expose the miniature's undercarriage, bring out the colours and capture detail, you will need theological quantities of light. With enough illumination, even the camera in a smartphone can take satisfying pictures (I use a Samsung Galaxy s4 and have always been pleased with its performance). But without light, even the best mini becomes a dingy turd.
When I first started this blog, I took my photos outdoors, in the shade of a sunny day (see the above Meazels from Otherworld Miniatures for an example). The results were tolerable, but there was a lot of inconvenience: the wind kept knocking over my backdrop, the lighting changed with the cloud cover, and there was an ever present danger of fresh air getting into my lungs. The obvious solution was a light box, either bought from eBay or made at home. Light boxes provide the dual benefit of concentrating light indoors while creating a smooth background for the mini. After reading some helpful advice, I decided to purchase the Foldio portable light box.
I was attracted to the Foldio because it came with its own backdrops and a compact system of lighting, using lightweight LCD strips shining at the frequency of daylight. I also liked the fact that it packs up into a small, flat packet for easy storage.There is a lot to like about the Foldio. It arrived at my door (to Canada from Korea) in just two days after ordering. As promised, it takes only seconds to set up, and creates a crisp environment for pictures. The lights are powered by 9-volt batteries, which means there aren't a lot of cables cluttering up the table. In sum, the Foldio is simple, easy and tidy. A picture of the same Meazels from my Foldio shows dramatic improvement:
![]( "DM24 Meazels from Otherworld Miniatures (sculpted by Kev Adams, 2011)")
But the Foldio has limitations. It is small (10 inches across), so it's a poor solution for large dioramas or vehicles. Additionally, the coloured backdrop (which can be changed to your taste) is fastened to the inside of the Foldio by little more than goodwill. And the battery connectors for the light strips seem fragile, especially if 9-volts are repeatedly being inserted and detached. But the greatest drawback of the Foldio is that, as sold, it doesn't provide nearly enough light for 28mm miniatures, which leads to a lot of hidden costs.
The basic Foldio is $49. I opted for the souped-up version ($59) with 2 LCD strips (both glued to the top of the light box). But with these two strips alone, this is the first picture I took of the Orc from Citadel's Talisman range:
![]( "Orc from Citadel's Talisman Range (Aly Morrison?)")
In order to fully illuminate my miniatures, I needed to purchase three more LCD strips from Orange Monkie. I then jury-rigged stands for them so they could provide light for the flanks and bottom of the Foldio. (These stands are constructed with common hobby supplies: balsa wood, weighted down with heavy washers. I fasten the batteries to the back of the stands by way of a fridge magnet glued to the wood).
When you add these extra light strips, plus a substantial amount of duties and shipping (not to mention batteries), my Foldio system has ballooned to almost $200. A do-it-yourself light box would have been vastly cheaper. On the other hand, the Foldio is convenient and elegant. Oh well. Light, like other precious commodities, can be surprisingly expensive.
Fully illuminated in a Foldio with 5 light strips